1 / 3
Suzuki Carry DD51T/DC51T strut rod bushing — zdjęcie 1
1 / 3

Suzuki Carry DD51T/DC51T strut rod bushing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU bushings for cheap

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1.1

This model is functionally identical to the original rubber bushings on DD51T and DC51T Suzuki Carrys. Print this only for troubleshooting reasons, such as chasing down the typical death wobble issue, or strictly for off-road only. Do not print these for street use.

I used 95A TPU with 9 walls and 20% gyroid infill. This seems to be plenty stiff. You'll need to print 4 of these to replace all the bushings. 

Tagi