1 / 3
IKEA Nissafors Gridfinity Baseplate Lightweight PLUS — zdjęcie 1
1 / 3

IKEA Nissafors Gridfinity Baseplate Lightweight PLUS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rebuilt at Lightweight wall thickness with the pin recesses and clearance height from the Medium version.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

A Gridfinity baseplate for the IKEA Nissafors cart that sits between the Lightweight and Medium versions: close to Lightweight in material use (linked on Tab "Remix"), but with the recesses and clearance needed to keep the cart's plastic pins in place.

Why this version

The original Lightweight plate requires removing the plastic pins from the cart.

Those pins tie the sheet metal walls to the shelf — take them out and the cart loses rigidity, which you notice once it's loaded. Medium keeps the pins, but uses noticeably more material than it needs to.

Lightweight PLUS has the Medium recesses and enough clearance over the pins, at roughly half the material of Medium.

Lightweight

Lightweight PLUS

Medium

Pins stay in

no

yes

yes

Supports

no

yes, under the pin recesses only

yes

Filament

~120 g*

207 g

~400 g*

A little over half of Medium, well under double Lightweight.

*The Lightweight and Medium figures are taken from the original listing — I haven't re-sliced them under my own settings yet. The 207 g is measured under the settings below and includes supports and brim. I'll replace all three with numbers sliced identically once I get to it.

Printing

Nozzle 0.4 · layer 0.2 · 3 wall loops · 3 top / 3 bottom · 4 % adaptive cubic

Supports: organic / tree, under the pin recesses only

Brim: inner and outer, 3 mm

Material: PLA - I used the Sunlu PLA Matte in Grey

The 3MF is already oriented for printing; if your slicer wants to add supports anywhere else, they aren't needed.

Files

3MF (print-ready, correctly oriented) · STL

License

CC BY-NC-SA 4.0

Remixes and extensions: please do, just link back.

Printing and selling: please don't — ask me first.

---

Part of my collection: Nissafors video cart — Gridfinity

If this saved you some filament: Buy me a Coffee!

Tagi