LED Fluorometer (Enclosure & Internal Mounts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An affordable, LED Fluorometer 3D print designs for chemistry labs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
An affordable, open-source LED Fluorometer for chemistry labs. Designed in collaboration with the Chemistry Department at Penn State. The plan was to provide a low-cost, hands-on DIY educational instrument replacing commercial equipment worth thousands of dollars. Uses a right-angle LED excitation and photodetector geometry to isolate fluorescence signal. Prints as a single STL kit. Check out this article for more details on putting it together and its potential results: A Portable, Low-Cost, LED Fluorimeter for Middle School, High School, and Undergraduate Chemistry Labs | Journal of Chemical Education | ACS Publications
Print settings:
.2 Layer Height at least
.12 for internal components (ideal)
Black Filament is best for blocking light
Additional required parts outside of 3D Printing:
Heat inserts for M2 (Eight)
M2 X 12 (Four)/M2 X 4 (Four)
EO Edmund Optical 458NM 1-10-15
LED
EO Emission Filter
Refer to Article to create your Board
Files provided under CC BY-NC 4.0