LED Fluorometer (Enclosure & Internal Mounts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An affordable, LED Fluorometer 3D print designs for chemistry labs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial
An affordable, open-source LED Fluorometer for chemistry labs. Designed in collaboration with the Chemistry Department at Penn State. The plan was to provide a low-cost, hands-on DIY educational instrument replacing commercial equipment worth thousands of dollars. Uses a right-angle LED excitation and photodetector geometry to isolate fluorescence signal. Prints as a single STL kit. Check out this article for more details on putting it together and its potential results: A Portable, Low-Cost, LED Fluorimeter for Middle School, High School, and Undergraduate Chemistry Labs | Journal of Chemical Education | ACS Publications
Print settings:
.2 Layer Height at least
.12 for internal components (ideal)
Black Filament is best for blocking light
Additional required parts outside of 3D Printing:
Heat inserts for M2 (Eight)
M2 X 12 (Four)/M2 X 4 (Four)
EO Edmund Optical 458NM 1-10-15
LED
EO Emission Filter
Refer to Article to create your Board
Files provided under CC BY-NC 4.0