1 / 5
Arri Anti-Twist Bracket 1/4-20 + 3/8-16 - HEAT-SET INSERT versions — zdjęcie 1
1 / 5

Arri Anti-Twist Bracket 1/4-20 + 3/8-16 - HEAT-SET INSERT versions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an anti-twist bracket to add onto cheeseplates that do not have this option. It requires heat-set inserts.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a set of brackets to add an arri anti-twist mounting point to a plate using 1/4"-20 screws. It can be used as an extension as well. It may seem silly to use three screws instead of one to mount something but believe me it's worth it ! You have the peace of mind that your monitor, transmitter or whatever your using won't literally turn your back on you :)

I used heat-set inserts so that you don't have to reprint those too often but it comes with some caviats due to their size :

  • the 3/8 anti-twist pin holes can only be used with a single pin, not both and it assumes you're using an accessory that has play in the screw placement like a mini-lock quick release. An RMB-8 wouldn't fit on this bracket.

  • the 1/4 anti-twist bracket uses the 3/8 anti-twist pattern so it may be an issue on very specific acessories but I never encountered a real issue yet.

The .step files are also provided :) I would have loved to make it parametric for everyone but I do not have a paid version of fusion 360.

I published 60, 70 and 80 mm versions for both threads as well as a single arm version that fits the Arri 1/4" pattern spacing.

Min/max screw spacings and other lengths :

60 mm

70 mm

80 mm

Single Arm

Center Height/Outer Diameter

min

max

min

max

min

max

max

1/4-20

34.1 mm

47 mm

34,1 mm

57 mm

34,1 mm

67 mm

25,4 mm

9/21,1 mm

3/8-16

38 mm

47 mm

38 mm

57 mm

38 mm

67 mm

25,4 mm

13,7/25 mm

I printed it in PCTG but a version in PA-CF would make more sense if you have this.

A version without threaded inserts is also in the works without the caviats is available here : 

Don't hesitate to comment if you have any question or improvement ideas and feel free to remix it !

Tagi