Arri Anti-Twist Bracket 1/4-20 + 3/8-16 - HEAT-SET INSERT versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an anti-twist bracket to add onto cheeseplates that do not have this option. It requires heat-set inserts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of brackets to add an arri anti-twist mounting point to a plate using 1/4"-20 screws. It can be used as an extension as well. It may seem silly to use three screws instead of one to mount something but believe me it's worth it ! You have the peace of mind that your monitor, transmitter or whatever your using won't literally turn your back on you :)
I used heat-set inserts so that you don't have to reprint those too often but it comes with some caviats due to their size :
the 3/8 anti-twist pin holes can only be used with a single pin, not both and it assumes you're using an accessory that has play in the screw placement like a mini-lock quick release. An RMB-8 wouldn't fit on this bracket.
the 1/4 anti-twist bracket uses the 3/8 anti-twist pattern so it may be an issue on very specific acessories but I never encountered a real issue yet.
The .step files are also provided :) I would have loved to make it parametric for everyone but I do not have a paid version of fusion 360.
I published 60, 70 and 80 mm versions for both threads as well as a single arm version that fits the Arri 1/4" pattern spacing.
Min/max screw spacings and other lengths :
60 mm | 70 mm | 80 mm | Single Arm | Center Height/Outer Diameter | ||||
|---|---|---|---|---|---|---|---|---|
min | max | min | max | min | max | max | ||
1/4-20 | 34.1 mm | 47 mm | 34,1 mm | 57 mm | 34,1 mm | 67 mm | 25,4 mm | 9/21,1 mm |
3/8-16 | 38 mm | 47 mm | 38 mm | 57 mm | 38 mm | 67 mm | 25,4 mm | 13,7/25 mm |
I printed it in PCTG but a version in PA-CF would make more sense if you have this.
A version without threaded inserts is also in the works without the caviats is available here :
Don't hesitate to comment if you have any question or improvement ideas and feel free to remix it !