Counting matching models…
The bag carrier is a low-cost, 3D-printed handheld tool that distributes the weight of bags carried. This 3D Printed Assistive Device can assist people with arthritis or other disabilities to carry plastic bags and reusable bags. This bag…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Optimized for printing in colored 0.2mm layers: Layers 1~3 Grey Layers 4~6 White Layers 7~9 Red Layers 10~12 Black 70mm in length, the most common size from retailer versions. Sized to fit common earring hardware. Keychain versions also…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
Simple earrings inspired by the Pac-Man game. Print instructions If you slice the models on your own, the layer height must be thinner than 0.20 mm . You can use any filament for printing. You have to finish earrings yourself. For one…
2 pieces so you can print in separate colors with a pin and hole that should be a tight slide together depending on the tolerance of your printer. A dash of glue should hold it together forever!
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
For complete earrings, you need two printed earrings (very easily printable and without support), two earring hooks , and two rings . T-shirt Support me & Buy a T-shirt A snowflake is either a single ice crystal or an aggregation of ice…
A simple star-shaped earring. Can be printed very well with a 0.25 nozzle and PLA. I used Prusament PLA Galaxy black. A triquetra-shaped earring can be found at: https://www.printables.com/model/637090-triquetra-earring Spider earrings:…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Useful print to have when washing MGN12H carriage blocks in IPA in an ultrasonic bath or when you want to thoroughly clean/lubricate your linear rails without accidentally knocking the carriage off and having to pick up all the little…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Hot 2 Handle Carry your hot or cold beverages with ease! Features Stop singeing your fingers on piping hot coffee cups! Free your hand to open car or building doors while carrying your beverages safely in the other. Designed to fit a wide…
A simple triquetra-shaped earring. Can be printed very well with a 0.25 nozzle and PLA. I used Prusament PLA Galaxy black. A star-shaped earring can be found at: https://www.printables.com/model/637080-star-earring Spider earrings:…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Remix of YZC DESIGN's earring stand. Holds 5 pairs of earrings on each row (or 10 if hung in pairs) Taller and more dramatic angle to hold longer dangle earrings Crossbars print at 0.25 layer height. The crossbars are the EXACT size to…
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
I made small adjustments so that the structure. A PLA printed earring. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
I made small adjustments so that the structure. A PLA printed earring. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a…
I needed a cute little way to display some earrings, so I came up with this. As the summary says, it's a 3-piece miniature rack with two models of hangers. The two pieces that make up the rack itself are the "rack core" and the "braket".…
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
I made small adjustments so that the structure I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀 I'm a…
Designed for single-color printers with 1 filament change included. Order: Blue, Yellow. Scale to any size. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit…
Golden State Warriors 3D Basketball Logo
Hexagon Honeycomb Bee Earrings with color change.🐝 A pair of bees sat on a round disk of honeycomb made of hexagons, perfect for nature lovers and bee enthusiasts! Has a hexagon loop at the top for easy attachment to your preferred…
This earring is designed in Shapr3D and then adapted to lowpoly in Prusa slicer 2.6. The STL is re-exported from slicer. The print is very simple and fast. The earrings on foto are printed with 0,4mm nozzle, 0,2mm layer. Material is…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Pi Day (March 14) is coming up and I wanted to make something for it! This is a small gyro-style spinning pi symbol print designed to be used as earrings, charm, keychain, zipper pull, etc. The pi symbol is designed so that it faces…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
This model is based on the snake that appears in an album by the rock group Metallica. Some edits were made at certain points to make editing easier. A PLA printed earring. I recommend reducing the printing speed to 80% either from the…
This is a very simple model to print I used 100% infill and a 1.5 layer height
Print took around 33hrs with %15 infill, .16 layer height. Has moveable wheels and SAM surface-to-air-missile.
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
There are already a lot of gingerbread men designs. But I wanted earrings with the hole through the top instead of a hoop. This makes a much nicer earring in my opinion. So I just took the ideas I liked from a lot of different designs and…
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
This is for a taller Z axis, 120mm, and to use HGH linear rails to eliminate movement on the spindle and spindle mount. to use this take off the current X carriage and take the Z carriage off as well, mount a 20mm HGH rail onto the…
This model is based on the band Depeche Mode - Violator. Some edits were made at certain points to make editing easier. A PLA printed earring. I recommend reducing the printing speed to 80% either from the machine or the program you are…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Remixed from https://www.printables.com/model/386693-coffee-cup-earrings I made them a little bigger and removed the hoop. Instead, I put in a hole for the first ring. The .bgcode files make two earrings.
A PLA printed earring. I recommend reducing the printing speed to 80% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment. I'm a bit sleepy, can you help…
A remix of yeg3d 's Ducky the Lop Eared Bunny : cute little earrings. Print Settings Brim: Yes Resolution: 0.05 Infill: 5 Post-Printing Scale to 6 or 7% when using the .stl How I Designed This Remixed with Autodesk Meshmixer
I made small adjustments so that the structure. A PLA printed earring. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a…
There are plenty of Tie Fighter models to be found. This remix was created to make it easier to print at a small size. The wings are thicker, the central beams have been simplified. This hopefully makes the print less fragile and…
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
A simple carrier zerup syrup bottles. It holds 6 bottles and has a little handle to carry around. Mine was printed in PETG on a prusa mini. It should work as well with PLA. I am quite new at 3d modeling/printing so it remains simple. I…
Every sewing project needs a different color, and for every color a new coil have to set up. I just lost the overview wherefore I made a simple carrier to keep them organized somehow. It works for standard sewing machine bottom coils (at…
Assyrian Shard Pendant / Earring Probably King Sargon II Although I have this situated to print flat on its back, honestly its probably best to print this vertically with the face details along the Y axis. I have heard that these kind of…
For this model, if you use the same size as provided in the file, the color change occurs at layer 9. I used CURA for its formatting. The speed will depend on the machine and the type of PLA you are using. I always recommend that the…
If you use the STL file at its downloaded size, the color change occurs at layer 6 The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20%…
On the beach or in the backyard always be ready to whack your brother with style. This is a pool noodle Gladius sword hilt and the first post in a collection I am calling warrior gear. It is a set of interchangeable handles, pommels and…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
I made small adjustments so that the structure doesn't become weak, and I also added the circle for attaching it. I recommend printing slowly to maintain the quality. I recommend reducing the printing speed to 70% either from the machine…
Scale model of classic meeple from boardgames. Just glue it on plated stud - I bought them at Alliexpress . Dimensions: 100% is 15x7 mm - print at 80% scale (in the photo) Use ironing or smooth plate (or both).
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Traffic cones are too big to fit on your desk so why not make some model cones for decoration or play? These 52 mm tall models stack together like real cones. There are three models ready to print. First, the snap together multi-colour…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
A caricature of an Ice Warrior from Doctor Who Update: Added multicolor version for AMS/MMS. Untested!
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
two-color printing (may not be); the spring-loaded model airplane moves with any head movement. after printing, the spring must be stretched and shaped (sorry for blurry photo, my old hands are shaking a bit..) ** dvoubarevný tisk (nemusí…
This 3D printed earring design showcases a cluster of overlapping circles in an intricate, lightweight pattern. They are designed to face outward to display the print pattern for an added decorative element. These were printed with PLA at…
Made two mount plates, one flat and one with slots for landing skids/wheels. The landing legs have 2.5mm hole which I tap to M3 thread and use a M3x8mm screw. A rubber band is used to angle the skids up ~15 degrees during flight. The rear…
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Ein Halter um das Zubehör des Shark Flexstyle Föns griffbereit aufzubewahren. Den Halter haben wir mit doppelseitigem Klebeband an der Wand befestigt. Gedruckt in PETG im Modus 0,2mm Structural mit minimalem Einsatz von Stützmaterial für…
I printed it without any supports and it turned out fine, I do not recommend it though.
A PLA printed. I recommend reducing the printing speed to 80% either from the machine or the program you are using to 20-30% to avoid errors. I'm a bit sleepy, can you help me with a beer? It's to keep creating things 👽🤘…
I love so much my XL5, I regret nothing ! As a StarWars fan, I made a custom carriage cover with 3 colors. JarJar face has been created with Dall-A and used as an SVG insert for color Painting.
Smaller earrings made of four hexagons filled with three different patters and with one colour change to contrast the hexagons and the fill. You can easily change the patterns using the included 3mf file or by combining the hex-base and…
Whether you want to show off your love for engineering or just need a handy fidget, Gearrings , can do it all. Featuring two functioning gears secured between two snapfit plates with a hole for a 6mm jump ring. You can spin the gears to…
Prevent the LEMO connectors on the main cable from disappearing into the post, & protect the connector and fine thread with this little cap. The reatainer slides sideways onto the lower part on the LEMO in the lower notch, and is pressed…
Es un bonito carrito decorativo. Para colocar una pequeña planta o para lo que se nos ocurra o simplemente como elemento decorativo. Espero que os guste
Parts Required to Complete: SmallRig Mini V Mount Battery Plate with Belt Clip 2990 V Mount Accessory Plate ( 3D printed or from SmallRig MD2801 ) M3 x 6 Flat Head Screws (3) Battery Strap Velcro, Servo Tape, or Non-Slip Pad Why I Made…
Colleague has a strange pattern on her dress. She says they are flowers, but of course it looks more like something else.. assembled and joined by a larger ring ** Kolegyně má na šatech zvláštní vzor. Říká že to jsou kytičky, ale vypadá…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment. 🧀 I'm a…
Remove support Add/glue rubber (in black below) to prevent the parts from sliding (rotation) on the metal support Tighten with M4 six hex screw and nut
Enhance your Prusa MINI+ with this 5020 fan upgrade. Replace the MINI-x-carriage.stl part for improved layer cooling. 5020 fans mean more airflow thanks to their dual air income. This mod not only eliminates stringing but also handles…
This is a common closing pin for certain types of animal carriers. Print it, snap it in place and you're ready to go!
kaskáda trsátek na kytaru uchycená do jednoho kroužku / a cascade of guitar picks attached to one ring
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Für mein Wohnmobil habe ich eine Solar-Rückfahrkamera mit Funk-Übertragung besorgt ("AEG"). Da eine Kabellose Montage möglich ist und ich weder am Kennzeichenhalter noch oben am Wohnmobil die Befestigung für sinnvoll erachte, sollte sie…
This part is intended to be installed between the top cover and the vent cover of the Prusa Core One. It acts as a barrier to prevent insects, which are attracted to heat or light, from entering the printer. I designed it to use minimal…
Kleine zarte, herzige und dezente Ohrringe für Ostern. Gemacht mit PLA in 6 verschiedenen Farben. Beim Drucken als Haftung Brim verwenden, und als Support habe ich Tree verwendet. Small, delicate, sweet and subtle earrings for Easter.…
This design is based on the science fiction book 'The Three-Body Problem.' The design is in Chinese characters, so I had to make some minor modifications to make it easy to print and everything fit into a structure. My favorite book. A…
Quit Playing Games With My Heart. A fun little earring set, necklace or keychain inspired by heart dominoes. Size up or down but watch the size of the post hole. We included gcode for best placement of color swap. For the findings to make…
--EN-- One color version (with holes): I used PLA (0.2 layer height) and a pause, when I add the hook (afroháček from Stoklasa in Prague). I also add a small tower which will be printed before the earrings, so it save the earrings from…
This is a remix of the Warrior Gear Pool Noodle Hand and a Half sword by Ian Foulds to shrink the cross guard enough so that it'll just barely fit on a Prusa Mini diagonally across the build plate. I cut the crossguard into three parts…
These unique earrings are inspired by a geometric triangular design reminiscent of the Triforce shape. They are lightweight, easy to print, and make a bold fashion statement. Perfect for everyday wear or as a gift for fans of unique,…
I wanted a way to store/display earrings. So I mad a upcycling Model for the Prusament spools. I used a suction cup to mount the holder on the mirror (as shown in the picture). I tried to print one in flex but it didn't work. There is a…
For ARCANE animation series fans, I made a custom carriage cover with 3 colors. JINX graffiti has been turned into SVG insert for color painting.
This model is based on the entry 7r5k from the protein data bank (PDB), presented in this publication: Mosalaganti, S., Obarska-Kosinska, A., Siggel, M., Taniguchi, R., Turoňová, B., Zimmerli, C. E., ... & Beck, M. (2022). AI-based…
2x2x2 unit cells of a diamond crystal structure. Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for Prusa XL and 3…
I would recomend halfing your printspeed if you like to print it in original size. I included 2 Versions of this Model: With base Without any base Trust me the model looks way better, when you paint it ;) If you love this design and want…
I needed to create an adapter in my laboratory to connect two different barrier tape systems from the links below:…
