1 / 8
Ichigo Kurosaki | BloodChain Bankai — zdjęcie 1
1 / 8

Ichigo Kurosaki | BloodChain Bankai

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ichigo Kurosaki's Bloodchain Bankai From Bleach Thousand Years Blood War Sculpted in Blender,

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

⚔ A stylized Ichigo figure, sculpted from scratch in Blender and test printed before release.

 

Watch Video:
How the Model was Created: https://youtu.be/NW3YCwqdeNo
3D Print & Paint: https://youtu.be/ze9i-B6tT_4

 

📐 Specs
• Parts: 3 (figure, base, accessory)
• Formats: STL + 3MF

 

🖨 Tested print profile
• Layer height: 0.2 mm (first layer 0.2 mm)
• Nozzle: 0.4 mm
• Wall loops: 4 · Sparse infill: grid
• Speeds: first layer 50 mm/s · outer wall 150 mm/s · inner wall 200 mm/s · travel 400 mm/s
• Acceleration: 10000 mm/s (first layer 500 mm/s)
• Supports: tree (auto), slim, threshold 12°
• Flow ratio: 0.95

 

📦 What's included
• STL files (per part)
• 3MF with the tested profile
• Pre-supported plate

 

⚠ Note before printing
• One part is not fully watertight (8 boundary edges, 6 non-manifold edges on the main body). Run a mesh repair pass in your slicer or in Blender's 3D Print Toolbox before slicing.

 

🙏 Personal fan-art study. Bleach and its characters belong to Tite Kubo / Shueisha. Not for commercial resale. 

One Important Info: When i printed my version based on these settings, the moons 3d printing failed. So i had to Re-print it. You can see the youtube video, i have showcase my print timelapse there.