Ichigo Kurosaki | BloodChain Bankai
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ichigo Kurosaki's Bloodchain Bankai From Bleach Thousand Years Blood War Sculpted in Blender,
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
⚔ A stylized Ichigo figure, sculpted from scratch in Blender and test printed before release.
Watch Video:
How the Model was Created: https://youtu.be/NW3YCwqdeNo
3D Print & Paint: https://youtu.be/ze9i-B6tT_4
📐 Specs
• Parts: 3 (figure, base, accessory)
• Formats: STL + 3MF
🖨 Tested print profile
• Layer height: 0.2 mm (first layer 0.2 mm)
• Nozzle: 0.4 mm
• Wall loops: 4 · Sparse infill: grid
• Speeds: first layer 50 mm/s · outer wall 150 mm/s · inner wall 200 mm/s · travel 400 mm/s
• Acceleration: 10000 mm/s (first layer 500 mm/s)
• Supports: tree (auto), slim, threshold 12°
• Flow ratio: 0.95
📦 What's included
• STL files (per part)
• 3MF with the tested profile
• Pre-supported plate
⚠ Note before printing
• One part is not fully watertight (8 boundary edges, 6 non-manifold edges on the main body). Run a mesh repair pass in your slicer or in Blender's 3D Print Toolbox before slicing.
🙏 Personal fan-art study. Bleach and its characters belong to Tite Kubo / Shueisha. Not for commercial resale.
One Important Info: When i printed my version based on these settings, the moons 3d printing failed. So i had to Re-print it. You can see the youtube video, i have showcase my print timelapse there.
