308 Ammo Box – 21 Rounds – Moose, Deer, Roe Buck & Wild Boar Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable ammo box for 21 rounds of .308 , with interchangeable hunting-themed lids featuring moose, dee
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printable ammunition box for .308 Winchester cartridges. The design includes interchangeable hunting-themed lids featuring moose, deer, roe buck and wild boar. Designed as a practical and good-looking cartridge storage box for hunters. 1 × ammo box body
1 × lid
1 × sealing/gasket frame
2 × printed hinge/locking parts
6 × M3 screws, cut to 35 mm
6 × M3 nuts
Assembly
Clean all printed parts and remove any support material or loose filament.
Drill all screw holes carefully with a 3 mm drill bit.
Cut the M3 screws to approximately 35 mm using a screw/wire cutting tool.
Position the lid, hinges and locking parts as shown.
Push the M3 screws through the prepared holes.
Fit an M3 nut to each screw.
Tighten carefully until everything moves smoothly and sits securely.
Do not overtighten the screws, as this can damage the printed parts.
Tip: Black M3 screws look especially good with the hunting-style ammo box.
