Magnetic Glasses Holder for Shirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smart magnetic glasses holder for your clothing. Easy to print, no supports, uses 4x 10x2mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 80
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
### Overview
This is a Minimalist Magnetic Glasses Holder designed to keep your eyeglasses or sunglasses securely attached to your t-shirt, shirt, or jacket without damaging the fabric. It consists of two parts: an inner backplate and an outer loop that snap together using strong magnets.
### Features
* No Clothing Damage: Uses magnets instead of pins or clips, keeping your shirts safe.
* Secure Hold: Perfect for everyday wear, walking, or working.
* Two-Part Design: Includes the inner plate (piatto) and the outer loop (ansa).
### Print Settings
* **Material:** PLA works perfectly (though PETG is recommended if you plan to leave it in a hot car).
* Layer Height: 0.2mm or 0.16mm for a cleaner finish on the curved loop.
* Infill: 15% to 20% (Grid or Gyroid).
* Supports: No supports needed. Both parts are designed with flat faces for easy printing.
### Assembly & Usage Tips
1. Check Polarity: Before applying any glue, make sure the magnets in the inner plate and the outer loop are facing the right way so they attract each other!
2. Glue the Magnets: Put a tiny drop of super glue (CA glue) into each slot. Press the 10x2mm magnets firmly inside.
3. Flush Fit: The magnet slots are intentionally designed so that the magnets sit flush or just a tiny bit proud (protruding). This ensures maximum magnetic grip through your clothing.
4. How to Wear: Place the flat backplate underneath your t-shirt/shirt, lock the outer loop from the outside, and slide one temple of your glasses through the loop.