Magnetic Glasses Holder for Shirts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smart magnetic glasses holder for your clothing. Easy to print, no supports, uses 4x 10x2mm magnets.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 1
- Views
- 80
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
### Overview
This is a Minimalist Magnetic Glasses Holder designed to keep your eyeglasses or sunglasses securely attached to your t-shirt, shirt, or jacket without damaging the fabric. It consists of two parts: an inner backplate and an outer loop that snap together using strong magnets.
### Features
* No Clothing Damage: Uses magnets instead of pins or clips, keeping your shirts safe.
* Secure Hold: Perfect for everyday wear, walking, or working.
* Two-Part Design: Includes the inner plate (piatto) and the outer loop (ansa).
### Print Settings
* **Material:** PLA works perfectly (though PETG is recommended if you plan to leave it in a hot car).
* Layer Height: 0.2mm or 0.16mm for a cleaner finish on the curved loop.
* Infill: 15% to 20% (Grid or Gyroid).
* Supports: No supports needed. Both parts are designed with flat faces for easy printing.
### Assembly & Usage Tips
1. Check Polarity: Before applying any glue, make sure the magnets in the inner plate and the outer loop are facing the right way so they attract each other!
2. Glue the Magnets: Put a tiny drop of super glue (CA glue) into each slot. Press the 10x2mm magnets firmly inside.
3. Flush Fit: The magnet slots are intentionally designed so that the magnets sit flush or just a tiny bit proud (protruding). This ensures maximum magnetic grip through your clothing.
4. How to Wear: Place the flat backplate underneath your t-shirt/shirt, lock the outer loop from the outside, and slide one temple of your glasses through the loop.