Kreg Edge Loose Tenon Joiner to Festool D27 Dust Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Summary: A 3D-printable dust adapter connecting the Kreg Edge 20V Ionic Drive Loose Tenon Joiner to a Festool D27 or D27
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 62
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary:
A 3D-printable dust adapter connecting the Kreg Edge 20V Ionic Drive Loose Tenon Joiner to a Festool D27 or D27/32 hose with its factory tool-end cuff installed.
Designed around a measured Kreg dust port of 36.9 mm outside diameter and 31.8 mm inside diameter. The adapter slips over the Kreg port and accepts the Festool cuff in a tapered friction-fit socket. Overall dimensions are 42.75 mm maximum diameter × 51 mm long.
Includes printable STL, editable Fusion 360 and STEP files, and fit-test pieces for adjusting printer tolerances.
Suggested printing: PETG, 0.2 mm layers, 5–6 walls, upright with the Kreg opening on the bed. No supports intended.
Status: CAD and mesh geometry validated; physical fit and printing have been validated, but only over a short time frame. This design does not include a CLEANTEC bayonet lock, so that would be a great enhancement.
