Kreg Edge Loose Tenon Joiner to Festool D27 Dust Hose Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Summary: A 3D-printable dust adapter connecting the Kreg Edge 20V Ionic Drive Loose Tenon Joiner to a Festool D27 or D27
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 1
- Views
- 62
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Summary:
A 3D-printable dust adapter connecting the Kreg Edge 20V Ionic Drive Loose Tenon Joiner to a Festool D27 or D27/32 hose with its factory tool-end cuff installed.
Designed around a measured Kreg dust port of 36.9 mm outside diameter and 31.8 mm inside diameter. The adapter slips over the Kreg port and accepts the Festool cuff in a tapered friction-fit socket. Overall dimensions are 42.75 mm maximum diameter × 51 mm long.
Includes printable STL, editable Fusion 360 and STEP files, and fit-test pieces for adjusting printer tolerances.
Suggested printing: PETG, 0.2 mm layers, 5–6 walls, upright with the Kreg opening on the bed. No supports intended.
Status: CAD and mesh geometry validated; physical fit and printing have been validated, but only over a short time frame. This design does not include a CLEANTEC bayonet lock, so that would be a great enhancement.
