Saw Blade Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger for decorative saw blades that sits flush-ish with the wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The Saw Blade center is about 12mm and the blade is 10in. I was looking for something that sat as close to the wall as possible. Also thought it would be fun if you could swing it. The design is 2 pieces the part that mounts to the wall and the clip that holds the blade in.
First mount the hanger with a nail, then place your saw blade, then insert the clip. The clip has some tabs that dont do much, so the mount is mostly a friction fit.
PRINT SETTINGS & MATERIAL:
Material: SUNLU PLA CLEAR
Height: .2mm For hanger. .15mm For clip.
Infill: 15% Gyroid. This is my default.
Print Speed: Slow for clip. Fast for hanger