1 / 2
UM980 GNSS Module Enclosure — zdjęcie 1
1 / 2

UM980 GNSS Module Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small 3D printed enclosure for a Unicore UM980 module.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

A small 3D printed enclosure for a Unicore UM980 module.

I bought this module on AliExpress. It came with headers, which I unsoldered.

This design is not perfect (yet? Contributions welcome).

Flaws of the design:

  • The antenna hole is slightly too small

  • The antenna hole is slightly too close to the USB port, causing the two connectors to touch when the antenna connector is rotated in a certain way

  • The antenna hole has a hex cutout, which is supposed to catch a part of the antenna connector and prevent it from rotating but it is too small and way too shallow

  • The hole for the threaded insert only has two layers of plastic between the threaded insert and the bottom

  • One of the standoffs has a square cutout to make room for the antenna connector on the PCB (a through-hole component). The square cutout is too small

The source code is at https://github.com/Luflosi/UM980-GNSS-Module-Enclosure and https://git.sr.ht/~luflosi/UM980-GNSS-Module-Enclosure.

Tagi