UM980 GNSS Module Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small 3D printed enclosure for a Unicore UM980 module.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
A small 3D printed enclosure for a Unicore UM980 module.
I bought this module on AliExpress. It came with headers, which I unsoldered.
This design is not perfect (yet? Contributions welcome).
Flaws of the design:
The antenna hole is slightly too small
The antenna hole is slightly too close to the USB port, causing the two connectors to touch when the antenna connector is rotated in a certain way
The antenna hole has a hex cutout, which is supposed to catch a part of the antenna connector and prevent it from rotating but it is too small and way too shallow
The hole for the threaded insert only has two layers of plastic between the threaded insert and the bottom
One of the standoffs has a square cutout to make room for the antenna connector on the PCB (a through-hole component). The square cutout is too small
The source code is at https://github.com/Luflosi/UM980-GNSS-Module-Enclosure and https://git.sr.ht/~luflosi/UM980-GNSS-Module-Enclosure.