Loxone Wall Display 10 Surface-Mount Base

This surface-mount base is designed specifically for the Loxone Wall Display 10" (100891) and provides a mounting base for surface-mounted installations.

The Wall Display is designed to live on a wall. Getting the required wiring there entirely on the surface, however, apparently needed one more part. So here it is.

Fitment to the Loxone Wall Display 10" has been verified on the physical device.

AI-Designed Model

This model was designed entirely by a trained AI agent using the technical documentation and datasheets for the Loxone Wall Display 10" as its design basis.

The design was reviewed and iteratively corrected by the AI agent where necessary. I did not manually construct or modify the geometry.

My part of the process was the physical verification of the resulting model, including its fit on the actual Wall Display.

In short: AI did the CAD work. I checked whether its homework actually fits.

Print Parameters

• No specific print parameters are provided.

Mounting / Usage

• Designed specifically for the Loxone Wall Display 10"

• Loxone Part No. 100891

• Fit verified on the physical device

• Intended for surface-mounted installation

• Provides a separate mounting base behind the display

Files

• STL

• OpenSCAD source file

The OpenSCAD source is included for inspection and further modification of the model.

Limitations / Notes

Compatibility with other Loxone displays or devices has not been verified.

The geometry was generated and iteratively corrected by an AI agent based on the available technical documentation. The resulting model was physically verified by the author, but not manually designed or modified by the author.

This is an independent DIY accessory and is not an official Loxone product.

Disclaimer

The 3D model was created using AI. The author did not manually construct the model geometry; the resulting design and fit were physically verified by the author.

This description was generated using AI.