1 / 3
Anet A6 LCD for Anet A8 (LCD12864) Night Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap on cover to block the lcd light when having a print going overnight. Modeled to work with Anet A6 LCD for Anet A8…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Snap on cover to block the lcd light when having a print going overnight.
Modeled to work with Anet A6 LCD for Anet A8 (LCD12864) thing:2923917
Since the housing is the same size as the stock frame this mod is compatible with stock lcd. The housing is 78mm wide and the stock display is 75mm wide so you have a slight tolerance on each side.
I recommend printing on its side standing up, in this orientation no support is needed.
Category: 3D Printing