1 / 5
Jura A1-A5-A7-A9-ENA Micro Brew Group Scraper Blade (J71297) — zdjęcie 1
1 / 5

Jura A1-A5-A7-A9-ENA Micro Brew Group Scraper Blade (J71297)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This remix adjusts the original model to more closely match the broken factory part from my Jura A7.

Changes:

  • Reduced the main plate thickness from 3 mm to 2 mm.

  • Made the central protrusion hollow, with a rear opening measuring 9 × 18.5 mm and a maximum cavity depth of 18 mm.

  • Set the protrusion’s total height, including the plate, to 20 mm.

  • Reshaped its profile with a rounder peak, a smoother descending curve, and rounded side edges.

  • Added 2 × 2 mm notches to the inner ends of both ribs beside the mounting bridge.

  • Rounded the mounting bridge’s outer bend.

Tagi