Magnetic Magazine Holster Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pocket magazine holder for concealed carry. Designed for full-size Glock magazines.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic clip for a Glock magazine.
It is printed in two parts: the body and the clip. You will also need 4 neodymium magnets.
Magnets:
4x - 10 mm x 2.6 mm
Both parts can be press-fitted together (It depends on your printer settings. You may need to trim the edges of the clip slightly). The magnets can also be just pushed into place. That said, I recommend a drop of glue for 100% security.
Recommended print settings
Clip:
PETG, 4 perimeters, side-facing for strength.
Body:
The material doesn’t really matter. I print it in PLA for aesthetic reasons. 2 perimeters, 15% infill