Magnetic Magazine Holster Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pocket magazine holder for concealed carry. Designed for full-size Glock magazines.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic clip for a Glock magazine.
It is printed in two parts: the body and the clip. You will also need 4 neodymium magnets.
Magnets:
4x - 10 mm x 2.6 mm
Both parts can be press-fitted together (It depends on your printer settings. You may need to trim the edges of the clip slightly). The magnets can also be just pushed into place. That said, I recommend a drop of glue for 100% security.
Recommended print settings
Clip:
PETG, 4 perimeters, side-facing for strength.
Body:
The material doesn’t really matter. I print it in PLA for aesthetic reasons. 2 perimeters, 15% infill