Reinforced Kingdom Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Adafruit's Keyblade to accept an 11mm threaded rod and made a keyring that look more like in game.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is Adafruit's keyblade model modified so you can insert a threaded rod through all the tubular pieces. There are no pre-made threads, the rod should carve it's own threads as you insert it.
I strongly recommend that you assemble the whole keyblade except for the handle endcap before inserting the threaded rod so as to ensure proper alignment of the parts. I ended up cutting the rod after I inserted it, but I'd say you need about 2 feet of 11mm threaded rod.
I ended up inserting it manually until the rod passed the handle and dug into the main shaft to avoid damaging the handguards. Afterwards I connected a drill to the rod and let it rip. Make sure to hold the shaft firmly because there can be a lot of resistance. you can tell you went far enough once the key's teeth move, just twist it back until the teeth are back in place.
WARNING: inserting the rod, especially with a drill, can be extremely loud, expect your loved ones to complain.
This is my first time uploading a model, so let me know if I messed up somehow.