Reinforced Kingdom Key
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Adafruit's Keyblade to accept an 11mm threaded rod and made a keyring that look more like in game.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
This is Adafruit's keyblade model modified so you can insert a threaded rod through all the tubular pieces. There are no pre-made threads, the rod should carve it's own threads as you insert it.
I strongly recommend that you assemble the whole keyblade except for the handle endcap before inserting the threaded rod so as to ensure proper alignment of the parts. I ended up cutting the rod after I inserted it, but I'd say you need about 2 feet of 11mm threaded rod.
I ended up inserting it manually until the rod passed the handle and dug into the main shaft to avoid damaging the handguards. Afterwards I connected a drill to the rod and let it rip. Make sure to hold the shaft firmly because there can be a lot of resistance. you can tell you went far enough once the key's teeth move, just twist it back until the teeth are back in place.
WARNING: inserting the rod, especially with a drill, can be extremely loud, expect your loved ones to complain.
This is my first time uploading a model, so let me know if I messed up somehow.