Embody Chair Arm height lever button replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the height adjustment button on a Herman Miller Embody Chair.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
After breaking the armrest height lever on a Herman Miller Embody task chair, I couldn't find a replacement or mod that fixed it anywhere. I quickly threw together this part. It is certainly not perfect, but it does the job well enough for me.
Print Settings: I used PETG (PLA is most likely too brittle for long-term use). 0.15mm, 5 perimeters, 25% infill. Supports Enabled. Rotated the part at a 35 degree angle so the bottom/top surfaces stay relatively clean.
This is an unofficial, user-designed replacement part, not affiliated with or endorsed by Herman Miller. It is provided as-is with no warranty. It unlocks the armrest height adjustment, so if it fails the arm can drop; material, settings, and fit are up to you. Using it may affect your chair's warranty. Print and use at your own risk.