Embody Chair Arm height lever button replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the height adjustment button on a Herman Miller Embody Chair.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
After breaking the armrest height lever on a Herman Miller Embody task chair, I couldn't find a replacement or mod that fixed it anywhere. I quickly threw together this part. It is certainly not perfect, but it does the job well enough for me.
Print Settings: I used PETG (PLA is most likely too brittle for long-term use). 0.15mm, 5 perimeters, 25% infill. Supports Enabled. Rotated the part at a 35 degree angle so the bottom/top surfaces stay relatively clean.
This is an unofficial, user-designed replacement part, not affiliated with or endorsed by Herman Miller. It is provided as-is with no warranty. It unlocks the armrest height adjustment, so if it fails the arm can drop; material, settings, and fit are up to you. Using it may affect your chair's warranty. Print and use at your own risk.