Rigid/AEG Battery Mount & Breakout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two part adapter for Rigid/AEG batteries
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Info
A two piece battery mount for Rigid/AEG batteries. Designed to accept two small pieces of copper strips, bent to fit into the slots in the model, to allow for an electrical connection.
STEP and STL files included for hopefully easier remixing.
The two pieces are designed to be connected with four #8-32 screws. They just thread into the plastic in the base part.
Several mounting holes are in the base part for mounting to whatever (or routing the wires out the back if you want).
Printing
Print the base standing up on end. No supports needed. You may want a brim if you have a bed-slinger. But it printed ok on H2S with no brim.
Print the terminal piece laying on its back. No supports needed on either part.