1 / 1
Minimal Plant Saucer 145mm Pot – 0.8mm Thin Wall — zdjęcie 1

Minimal Plant Saucer 145mm Pot – 0.8mm Thin Wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight 0.8 mm plant saucer with 5 mm clearance. Simple, low-filament design with no supports required.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A simple, lightweight plant pot saucer designed for 3D printing. The tray uses a thin 0.8 mm base and wall to minimize filament use while still providing enough depth to catch excess water. Designed with 5 mm clearance around the pot for an easy fit and clean appearance. No supports are required.

Tagi