The Lionel - A Vintage 60% Tray-Mount Case Based on the Commodore 64
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tray-mount case for 60% keyboards based on the Commodore 64. I call it the Lionel because it's a fraction of…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 789
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tray-mount case for 60% keyboards based on the Commodore 64. I call it the Lionel because it's a fraction of the size of a full Commodore 64.
It is a remix of two models:
- Commodore 64 model https://www.threeding.com/3d-printing-models/commodore-64 by Allison Hubert.
- KeyBoard Case for Mechanical KeyBoard (Pok3r, GH60, Satan) by MaxWinterstein.
(See "Remixed From" section in the sidebar to the left for additional information.)
It should fit 60% PCBs with the standard GH60 standoffs. If you have a 60% PCB with non-standard standoff positions, you will need to alter this model's standoffs.
I originally wanted to add the top grille, but couldn't because of build plate size restrictions. (My da Vinci Nano only has a build plate size of 12 cm x 12 cm.)
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci nano
Rafts:
No
Supports:
Yes
Resolution:
200 microns
Infill:
10%
Filament: XYZPrinting PLA White
Notes:
Supports are needed for the USB cutout.
Category: Electronics