1 / 1
Jupyter 37A lens hood — zdjęcie 1

Jupyter 37A lens hood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a long lens hood for the Jupyter 37A 135mm f/3.5 old M42 lens.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This is a long lens hood for the Jupyter 37A 135mm f/3.5 old M42 lens. Actually it will fit any lens with a 52mm filter thread. I haven't yet work out how to do threads, so this part has an internal lip that fits inside the filter thread, and then it can be secured to the lens using some tape. Or you can glue it to some existing filter without its glass part.

I printed it with PETG. Adhesion is highly suggested because there is very little material touching the printer bed.

Tagi