1 / 1
Jupyter 37A lens hood
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a long lens hood for the Jupyter 37A 135mm f/3.5 old M42 lens.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a long lens hood for the Jupyter 37A 135mm f/3.5 old M42 lens. Actually it will fit any lens with a 52mm filter thread. I haven't yet work out how to do threads, so this part has an internal lip that fits inside the filter thread, and then it can be secured to the lens using some tape. Or you can glue it to some existing filter without its glass part.
I printed it with PETG. Adhesion is highly suggested because there is very little material touching the printer bed.