1 / 10
Creality K2 – 500g External Spool Box – Boîte pour porte-bobine externe — zdjęcie 1
1 / 10

Creality K2 – 500g External Spool Box – Boîte pour porte-bobine externe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

500g spool box for Creality K2 external holder – Boîte K2 avec sortie PTFE et bac à silice.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
🇬🇧 Creality K2 – 500g External Spool Box – V1

This box was specifically designed for the original external spool holder of the Creality K2.

The goal was to create a compact solution to enclose and protect a 500g filament spool directly in its original position, without having to place a separate box next to the printer.

The spool remains installed on the original K2 external spool holder, which passes through the enclosure. The filament exits through a PC4-M10 pneumatic fitting, allowing a PTFE tube to guide the filament toward the printer.

⚠ This is not a dry box

This enclosure is not airtight and is not intended to be a dry box.

An opening is required where the original K2 spool-holder arm passes through the enclosure. Therefore, the box cannot provide a completely sealed environment or precise humidity control.

However, I have integrated a removable silica gel container into the bottom of the box. Desiccant can be added to help reduce the humidity present around the spool.

The container is perforated to provide good air exchange inside the enclosure and can easily be removed when the silica gel needs to be replaced or regenerated.

Why did I design it?

This project originally started because of one particularly stubborn spool of TPU! 😈

I wanted to feed TPU directly from the external spool holder of my K2 while keeping the setup tidy and providing some additional protection for the spool while it remains installed on the printer.

Instead of placing a separate enclosure next to the K2, I designed one that fits directly around the original external spool holder.

Features
  • Designed for the Creality K2

  • Designed for 500g filament spools

  • Uses the original Creality K2 external spool holder

  • The spool rotates on the original holder

  • PC4-M10 pneumatic fitting for filament output

  • Compatible with PTFE tubing

  • Integrated removable silica gel container

  • Removable closing panel for easy spool access

  • Helps protect the spool from dust and its surroundings

  • Particularly useful for externally fed TPU and other filaments that are not fed through the CFS

  • No additional spool holder required

Required hardware

In addition to the printed parts:

  • Original Creality K2 external spool holder

  • 1 × PC4-M10 pneumatic fitting

  • A length of PTFE tube

  • Silica gel/desiccant if you want to use the integrated container

Included files

The download includes:

  • BoitePorteBobine500gr.stl – main enclosure

  • PlaquePorteBobine500gr.stl – closing panel

  • SilicaGelPorteBobine.stl – silica gel container

  • SilicaGelPlaque.stl – silica container cover

  • Porte Bobine.3mf – print project

Version 1 – 500g & planned developments
  • A 1kg spool version, with a few small improvements based on what I learned from this first version.

  • An extension / adapter plate to mount the external spool holder onto the CFS. There are two threaded mounting holes on the rear of the CFS that I plan to use as attachment points. An intermediate extension plate will be designed to provide enough clearance for the spool holder and the enclosure. This will be one of the next additions to the project.

The goal is to eventually have a clean and compact setup where the external spool holder and spool box can be mounted directly behind the CFS.

If you print the model, feel free to share your Make, feedback and suggestions for future improvements!


🇫🇷 Creality K2 – Boîte pour porte-bobine externe 500 g – V1

Cette boîte a été conçue spécifiquement pour le porte-bobine externe d'origine de la Creality K2.

L'objectif était de créer une solution compacte permettant d'enfermer et de protéger une bobine de 500 g directement sur son emplacement d'origine, sans ajouter une boîte indépendante à côté de l'imprimante.

La bobine reste installée sur le porte-bobine externe d'origine de la K2, qui traverse la boîte. Le filament ressort par un raccord pneumatique PC4-M10, permettant d'utiliser un tube PTFE pour le guider jusqu'à l'imprimante.

⚠ Ce n'est pas une boîte sèche

Cette boîte n'est pas hermétique et n'est pas une dry box.

Une ouverture est nécessaire au niveau du passage du mât du porte-bobine d'origine de la K2. Il n'est donc pas possible de garantir une atmosphère fermée ou un contrôle précis de l'humidité à l'intérieur.

J'ai néanmoins intégré dans la partie inférieure un bac amovible pour gel de silice. Il permet d'ajouter du dessiccant dans la boîte afin d'aider à limiter l'humidité présente autour de la bobine.

Le bac est largement ajouré pour favoriser les échanges avec l'air contenu dans la boîte et peut être retiré facilement pour remplacer ou régénérer le gel de silice.

Pourquoi cette boîte ?

À l'origine de ce projet : une bobine de TPU particulièrement récalcitrante ! 😈

Je souhaitais utiliser le porte-bobine externe de ma K2 pour alimenter directement la machine en TPU, tout en ayant une installation plus propre et en protégeant davantage la bobine lorsqu'elle reste sur l'imprimante.

Plutôt que d'installer une boîte séparée à côté de la K2, j'ai donc conçu une boîte directement autour du porte-bobine externe d'origine.

Caractéristiques
  • Conçue pour la Creality K2

  • Pour bobines de 500 g

  • Utilise le porte-bobine externe d'origine

  • La bobine tourne directement sur son support habituel

  • Sortie filament avec raccord PC4-M10

  • Compatible avec un tube PTFE

  • Bac à gel de silice amovible intégré

  • Accès facile à la bobine grâce à la plaque de fermeture amovible

  • Permet de protéger la bobine de la poussière et de son environnement

  • Particulièrement intéressante pour une alimentation externe en TPU ou autres filaments ne passant pas par le CFS

  • Aucun porte-bobine supplémentaire nécessaire

Matériel nécessaire

En plus des pièces imprimées :

  • Le porte-bobine externe d'origine de la Creality K2

  • 1 raccord pneumatique PC4-M10

  • Un morceau de tube PTFE

  • Du gel de silice si vous souhaitez utiliser le bac prévu à cet effet

Fichiers fournis

Le téléchargement comprend :

  • BoitePorteBobine500gr.stl – corps principal

  • PlaquePorteBobine500gr.stl – plaque de fermeture

  • SilicaGelPorteBobine.stl – bac à gel de silice

  • SilicaGelPlaque.stl – plaque du bac à silice

  • Porte Bobine.3mf – projet d'impression

Version 1 – 500 g & évolutions prévues

Il s'agit de la première version, conçue pour les bobines de 500 g.

Plusieurs évolutions sont déjà prévues :

  • Une version pour bobines de 1 kg, avec quelques légères améliorations issues de l'expérience acquise avec cette première version.

  • Une plaque de rallonge / adaptateur permettant de déplacer le porte-bobine externe sur le CFS. Le CFS dispose à l'arrière de deux trous taraudés que je souhaite utiliser comme points de fixation. Une plaque intermédiaire sera nécessaire afin de déporter suffisamment le porte-bobine et permettre l'installation de la boîte. Cette pièce fera l'objet d'un prochain développement.

L'objectif est d'obtenir à terme une installation compacte et propre, avec la possibilité de positionner la boîte et le porte-bobine externe directement à l'arrière du CFS.

Si vous imprimez le modèle, n'hésitez pas à partager votre Make, vos retours et vos suggestions d'amélioration !

Tagi