101 modeli
The lid can be printed in PLA. However, it is better to print the lids in a more temperature-resistant plastic, e.g. PETG. Lids made of PETG are more flexible and can be cleaned with hot water. Cleaning at reduced temperature (40°C) in…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
This is an adaptor to fit smaller spools in my Bambu Lab AMS. I wanted something that didn't use up a lot of filament. Video of how to install: https://youtube.com/shorts/zUIok2ksIUY?feature=share Printer: Bambu Lab X1-Carbon Speed:…
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
the main k10 spool holder is a little fragile and often brakes with the use of the printer and taking it off the printer is a pain in the bullocks, so i made this spool holder to solve this problem. use the 3mf file if you have a k10 but…
This adds weight to your spools so they stay in place when there is little filament left. Tested with many brands of filament spools like Prusa, Raise3d, Sunlu, Eryone, BambuLab, Wanhao, Flsun, Geeetech… Some spools like Geeetech need…
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
Größe angepasst auf Deckelgröße 2023 (500g) Rundung 5mm eingefügt Radius eingefügt, sodass ein Drucken ohne Support möglich ist 250g Variante hinzugefügt, danke @ jot-entdecken.de
Remix for the Silica gel spool container from gdrag. https://www.prusaprinters.org/de/prints/65922-silica-gel-spool-container I realy like his design, It looks cool, is easy to print and fits nicely into a 750g / 800g spool (his 50mm…
A simple adapter for a 500g weight to be held inside of a Bambu Labs reusable spool while in the AMS. The additional weight helps the AMS retract filament reliably when the spool gets light on filament. Here is a link to the weight used…
The lightest spare filament spool you can find online! All other versions take 100-150 grams of filament to make. TESTED PRINT PLUS THIS SPOOL NEEDS NO SCREWS OR GLUE TO CONNECT TWO PARTS . It has locking "mechanism" designed inside of…
Ich habe das ursprünglich auf Thingiverse von ChrisPHL veröffentlichte Modell etwas verändert: Die Orientierung wurde geändert und der Deckel wurde 1mm dünner gemacht, damit er flexibler ist. Ich habe den Deckel aus PP (Polypropylen)…
500gr version 200gr version here : https://www.printables.com/model/597230-solder-wire-spool-holder It doesn’t need support or anything else
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…
HOW TO THANK A DESIGNER? Post a make! If you like "universal" printer stuff, check out my printer stand/drawer system here: ⚙ Key Features of the spool adapter Sorry the first photo is messy, dang AI photo generator. But look at the other…
Tool holder for Slender Ball Pein Hammer 500 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 120mm W - 45,02mm H -…
This is a hopper extension that fits Breville Barista espresso machines. I always found it annoying that I could not fit a full bag in my machine and have to constantly fill the hopper. This hopper is designed to extend the built in…
I recently bought a Sunlu refill set (4 x 500 grams) and couldn't find a reusable spool for it. So here's one. :) It's important that it's printed with (at least) PETG, not PLA. Otherwise, it won't be stable enough and will warp or break…
Its a big box of desiccant that fits into the Sunlu S4 filament dryer. Fits about 500g of desiccant. printed the small in PC CF and the big in PETG CF.
Also added the STEP File
Adapter made with Fusion360 thinking on calibrated weights usage for the Bambu Labs AMS based on the adapter from elmaker Design This helps avoiding rewinding issues when finish printing or changing color putting more weight on the spool…
Mehrwegdeckel für 500g Joghurtbecher gut in TPU oder PC zu drucken kein Support nötig
500g Silica Gel box with sliding lid from mosave Two versions: 1. box as a single object 2. box apart to print it flat and glue together. Printer brand: Creality Printer: CR-10 Mini Rafts: No Support: No Resolution: 0.4 Infill: ~~…
Spacers to make it work for 500g spools
slide-on cover for a 500g quark from Aldi South (Milsani) Printed in PLA and PETG without any brim or supports
You may use the CAD, please be responsible. https://cad.onshape.com/documents/80c7dec9c631b80b9cf40258/w/5733ba0383be0e9ab0eebfa4/e/2b123b002b1936aa9e1a1e34?renderMode=0&uiState=67f7d4ae636c2a2252fb8766
This is a 3mf file for BambuStudio with brims added to the thin feet that tend to fail. It contains 2x 250g and 2x500g.
A common issue with the Creality Space Pi filament dryer is its design for larger 1kg spools, which causes smaller spools (like 250g and 500g) to not spin correctly and the filament to get dislodged from the rollers. This adapter solves…
I liked the previous Proto-Pasta 500g spool adapter for the AMS, but weight can be an issue so I wanted to make a few changes that include a narrower center opening to accommodate the Adjustable Spool Holder for Silica Gel / Spool Weight…
I like labels. The original model works great but doesn't have a space for a label. I have too many 500g spools to remember what’s what (thanks to the Endless PLA Filament Subscription) so I added spots for labels. I remixed the original…
This is an Airbrush cleaner designed to fit on a 500g Vegemite Jar. All parts can be printed without supports. You can put a small wad of cottonwool in the breather on the top and put the cap on. Fits Iwata HP-CS and Harder Steenbeck…
Dieses Modell ist die Hülle für einen Bad-Reichenhaller Salzstreuer Deckel (500g Dose). Ich habe es mit Perlweiß PLA (https://prusa3d.com/de/product/prusament-pla-pearl-white-blend-970g/) mit dem Prusa MK4 auf 0.20mm Quality gedruckt. Bei…
Spool weight adapter for Nobufil spools, 500g
This is a box for my Silica gel to use for vacuum bags. The box and the lid take only about 4.5 meters of filament, so short rests can be used. The funnel takes about 5 meter of filament. for 1kg spools check the original model. Printed…
Lid for yogurt pots with a standard capacity of 500 grams and a outer pot diameter of approx. 94.5 mm. Design was done for different yogurt pots sold in Austria. There are slight differences in the outer diameter of the cups in the tenths…
A remix of the original by Bram, designed to use half the space for a single roll of solder wire. Printed the same way as the original, made in mesh mixer.
This is an adapter to allow swapping Polymaker 500g cardboard spools with a large center to Bambu reusable spools. Simply tear off one side of the carboard spool, insert adpater inside the cardboard center, insert one side of the bambu…
It is holder for 500g CO2 Cylinder. Dimension: 75x75x80 mm. Hole: diameter 64 mm, length 70 mm.
Printed in Protopasta HPLA with default Prusa PLA printer settings.
A CSM Heel Weight for approx. 500g or lead ball bearings. I also wanted something a bit more aesthetic for myself than the solutions I looked at. Print with 4 walls, 15% rectilinear infill, 5 top/bottom layers in PETG or PLA+ - examples…
This is the 500g version of the door puller that replaces keyback in the original stealthpress. The force isn't quite strong enough to pull the iron up after you release it, but plenty enough to hold it in place, so it works good enough…
As there is no original part available form Geze, I designed my own. Just print it and mount it into the slide rail and fix it with a 5mm screw across and optional 2x4mm imbus from the bottom.
I just took delivery of some 500g refill rolls of Sunlu PETG so needed a reuseable spool to put it on, found a 250g remix of this one, but not a 500g one so remixed this model. When printing I'd suggest you make the bits that clip it…
Moved the mounting pegs out a bit to accommodate a bit better. Initial model was a bit too tight and had issues breaking and bowing which prevented it from working in the AMS.
V1: The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter…
I didn't want to have my CO2 bottle laying at the floor, so I designed this support for standing the EHEIM 500g disposable bottle :))
Printed with PLA. 0.2mm layer. 3 walls. 4 Top/Bottom layers. Top/Bottom surface pattern: concentric. Staggered inner seams: on. Scarf joint seam: contour and hole. Scarf joint for inner walls: on. Role base wipe speed: on. Wipe on loops:…
Bottle holder for the 500g CO2 bottles for aquariums (watertanks). My co2 bottle from Dennerle fits nice and tight. The inner diameter is 61mm. I print it in PLA. V1 is on the picture V2 is a bit more stable Print Settings Printer: Prusa…
I designed this with the intention of screwing it to the side of my printer cabinet. It can hold two 500g resin bottles. Honestly, I have never bought the 1000g bottles, but I assume the OD of those bottles is wider and would not fit. But…
These battery backup anti-tip stabilizers fit around an APC BR1500G Back-UPS Pro unit or the matching battery expansion to prevent it from tipping to the side. The sturdy triangular shape increases the footprint of the unit to improve…
S = 750g Spools M = 1000g Spools like Prusament XL = 2000g Spools
Remix pour utiliser les bobines de 500gr dans les drybox
This is a replacement lid for a rectangular 500g coffee container tin that's commonly available at least in Finland. I'm not sure how standardized these containers are or if some of them may have small differences in dimensions or the…
I primarily use 500g filament spools from Protopasta and I wanted a way to keep the spool centered in my Sunlu Heater Drybox when in use. Because the heater is designed for 1kg spools the smaller spools tend to move around a lot inside…
This is the bottle holder made by Dawnbreaker84 but with a hole in the bottom so air can easily get in when replacing the cylinder. I'd also recommend to print this 1% larger if you don't want it to be too tight fitting.
A Spool holder that simply holds 500g spools. Has a screw on rod that screws into place, preventing it from coming out. Has 2 prongs coming out the side of you want to tape your table of it keeps moving.
Small, easy and minimalistic print for 250/500G Filament spools, wall mounted. I used 18mm dowels (there is 0.3 mm extra clearance in the print). You can add a small nail in the hole to lock the dowel in place. If needed I can make…
If you print this and put it together, it may come out very weak. I sanded the tabs down a bit until they could fit if you applied pressure. Then I superglued them together, when its dried i take a bit of the filament. Put is in the gap,…
A really simple 500g fillament spool holder for almost any 3D printer Print Settings Printer: Qilive Q3622 Rafts: No Supports: Yes Resolution: 0.15-0.25 Infill: 50% 500g filaflex supported by fillament holder (no cleaning done)
Your QIDI 500 g spool deserves better than a basic silica box. TL;DR Everything you could want from a desiccant container for your QIDI 500g filament spools. Maximum airflow, secure spool retention, easy filling, a locking lid and no…
Dose für ca. 500g Nüsse die es in Beuteln zur Zeit zum Kauf gibt. Die Dichtung seitlich ist ein TPE Schnur, die durch ziehen eingedrückt wurde.
Print in the orientation in which it shows up in your slicer. This will make it so no supports are needed and will also be the strongest print due to the layer lines being perpendicular to the weight of the object you are placing on it.…
Description A small container to hold 4 Elegoo 500g resin bottles. Print instructions 5% infill and 0.3mm layer is more than fine. Tested with PETG but PLA should be fine also.
Second file is an open top version but i would use atleast one closed one so the holder won't tilt.
Hammer Halter für den Bosch 500g Hammer und ähnliche Hämmer mit French Cleat Leiste 15mm dick. Hammerkopfbreite beträgt 28mm
I used 2 types of steel washers to create the weight: always outer diameter: 30mm, thickness:1.5mm Type1: inner hole (needed for the hole where the foil fits in): hole diameter: 13mm Type2: hole as small as I could find to have the most…
A riser foot to protect the floor and raise an APC BR1500G UPS about 12mm off the floor. My UPS serves an aquarium controller, and I wanted to make sure that in the unlikely event of a leak, that the UPS would not end up sitting in any…
Ben jij het ook zo zat dat je kwark alleen zo'n irritant velletje heeft in plaats van een normale deksel? Nooit meer ben je verplicht om je kwark in 1x op te consumeren. Nimmer meer het zoeken naar een stukje plastic folie. Geen vies…
Simple cap to help with shacking the resin before use
I had a mixup during ordering the parts and accidentally ordered the 500g retractable device (used for the 1 and 1S) instead of the one meant for the ZERO. Thus this remix was made to hide my mistake :D So far it seems to work great.
A lid for the most popular bulk silica gel on Taobao: Ringchaowei 500g orange color changing silica gel . Designed to print fast. No supports required.
The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter 6mm…
Door uses 2.85mm filament as a hinge pin. Heat-stake the ends to fit within drum OD. Curve the (4) drum outside quarter parts by warming them on the build plate beyond glass transition temperature and then lay them on a cylindrical…
Eureka Atom Kaffeemühle Bohnenbehälter / Hopper Erweiterung von 300g auf 500g Kapazität. Der Behälter wird einfach nach oben verlängert, so dass man locker 500g auf einmal unterbringt. Die Dateien “smaller” fassen bei leerem Behälter…
My 500g cardboard spools kept getting bucked off of the Bambu AMS during printing. So I threw this together to hold desiccant or some weights, or you can just put whatever you want in it. Works great with the AMS so far, I live in a humid…
Print twice for one 500g spool at any layer height Instructions: Peel/tear off one side of the filament spool Use a blade to remove the extra glue at the edge Press-fit one adapter Flip over and repeat
🇬🇧 Creality K2 – 500g External Spool Box – V1 This box was specifically designed for the original external spool holder of the Creality K2 . The goal was to create a compact solution to enclose and protect a 500g filament spool directly…
I have created a kit of adapters wich combine with bearings, aluminium rod, threaded rod and fusion thread to a Spoll holder which can be screwed to a wall for big 4500g // 4.5kg spools. This system is the first attempt and by far not the…
I got new thermocouples for my MCR 500g roaster, but the ET probe wouldn't fit in with the air pressure gauge in its factory location. This bracket rises the gauge up enough to fit the probe in comfortable and also allows for it to be…
Got tired of babysitting my 500g spools in my multifilament feeder. When they retract they get all tangled. So I looked around and didn't see any, decided to make a simple adapter. Should fit all 50g spools effectively turning them into…
The original onn. SSD case can be fragile or lack personality. This 3D-printable replacement provides a sturdier housing while maintaining the ultra-fast speeds ( MB/s read) of the internal drive. Magnetic Mounting : The back features two…
This is an adapter I designed for use with Elegoo 500g cardboard spools. I used a spool of PETG-CF for reference. This adapter is designed to be compatible with an angled 30mm diameter shaft extension. This has a very edge use-case but I…
this is an insert for the standard parametric box which holds the 500g calibration weight set you can get in that flimsy blue box on aliexpress. i also included the F3D file and the parts for the box itself so you dont need to size it by…
This is a spool holder that i made so i can hold a 250g or 2kg spool instead of only having to use a 1kg spool cuz the spool holder the Prusa Core 1+ comes with can only hold a 1kg spool.
Customized version of http://www.thingiverse.com/thing:72069 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=72069 i made it so that you put a bearing on both sides of the spool Instructions Using the…
Do you use a Creality Space Pi Filament Dryer, but often print from spools that have been dried or just want to use your 250g or 500g spools without taking up dryer space? This is a stable, external desktop stand designed to cradle the…
I ordered 500g of TPU and found the spool was too narrow to roll without tipping over so I created an extender. It might be a bit overkill but I needed something quick to get the job done. In case eryone makes a different spool sizes and…
Ben jij het ook zo zat dat je kwark alleen zo'n irritant velletje heeft in plaats van een normale deksel? Nooit meer ben je verplicht om je kwark in 1x op te consumeren. Nimmer meer het zoeken naar een stukje plastic folie. Geen vies…
Print in the orientation in which it shows up in your slicer. This will make it so no supports are needed and will also be the strongest print due to the layer lines being perpendicular to the weight of the object you are placing on it.…
A CSM Heel Weight for approx. 500g or lead ball bearings. I also wanted something a bit more aesthetic for myself than the solutions I looked at. Print with 4 walls, 15% rectilinear infill, 5 top/bottom layers in PETG or PLA+ - examples…
I recently bought a Sunlu refill set (4 x 500 grams) and couldn't find a reusable spool for it. So here's one. :) It's important that it's printed with (at least) PETG, not PLA. Otherwise, it won't be stable enough and will warp or break…
The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter 6mm…
V1: The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter…
The original onn. SSD case can be fragile or lack personality. This 3D-printable replacement provides a sturdier housing while maintaining the ultra-fast speeds ( MB/s read) of the internal drive. Magnetic Mounting : The back features two…
HOW TO THANK A DESIGNER? Post a make! If you like "universal" printer stuff, check out my printer stand/drawer system here: ⚙ Key Features of the spool adapter Sorry the first photo is messy, dang AI photo generator. But look at the other…
slide-on cover for a 500g quark from Aldi South (Milsani) Printed in PLA and PETG without any brim or supports
