BambuLabs AMS Sunlu spools 500gr Weight adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter made with Fusion360 thinking on calibrated weights usage for the Bambu Labs AMS.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter made with Fusion360 thinking on calibrated weights usage for the Bambu Labs AMS based on the adapter from elmaker Design
This helps avoiding rewinding issues when finish printing or changing color putting more weight on the spool than the AA batteries design.
Will later add reduction adapters to be possible to also use 200gr calibrated weights.
The weight from the picture is available in Amazon.
https://www.amazon.de/dp/B015Q0ANRI?ref=ppx_yo2ov_dt_b_product_details&th=1
Hope this helps someone, being great to me.
Print settings:
Printer: BambuLabs X1C
Layer hight: 0.08
1st Layer hight: 0.2
Material:
PLA (Bambu Labs default settings) with following changes:
- Sparse infill pattern: Gyroid
- Sparse infill density: 20%
- Wall loops: 6
- infill combination active
I preferred to print with 0.08 to have a perfect thread. I will test to print with 0.2 to check if the thread works well also and update after.