500g Protopasta Spool Dessicant Weight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Container to fill with desiccant or weights that fits in the current 2025 Protopasta 500g spools. Works with Bambu AMS.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
My 500g cardboard spools kept getting bucked off of the Bambu AMS during printing. So I threw this together to hold desiccant or some weights, or you can just put whatever you want in it.
Works great with the AMS so far, I live in a humid area so any extra place to hide desiccant is helpful.
Printed at .16mm layer height, brims aren't necessary but won't hurt the print to add them. It'll probably want supports since it's threaded but I printed just fine on 50% speed (SLOW) without them.
The models in the photo that I've been using were printed in PLA, but I'd probably recommend PETG or ASA if your AMS sits on top of your printer.