Desoldering Pump Holder for Euro Keyhole Pegboard (Honeycomb)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desoldering pump holder for Euro keyhole pegboards (Lochwand/Euroloch). Keyhole mount, open honeycomb, no supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A holder for a standard desoldering pump (solder sucker) that hangs on a Euro keyhole pegboard: the type with round holes and keyhole slots, sold in Germany and Austria as "Lochwand mit Eurolochung" (ALDI Workzone, Küpper-style and similar).
This is a remix of "Skadis desoldering pump holder" by NeOn (CC0). I kept the pump sleeve and made two changes:
New mount: the IKEA Skådis hooks are replaced by a mushroom-head plug that fits the Euro keyhole.
Open honeycomb: the embossed honeycomb pattern is now cut all the way through the wall.
Fit / dimensions
Pegboard (measured) | Model | |
|---|---|---|
Keyhole, round part | Ø 9.5 mm | head Ø 8.8 mm |
Keyhole slot width | 5.5 mm | neck 5.1 × 7 mm (oblong) |
Board thickness | 1.5 mm (plastic) | 1.9 mm neck length |
Pump sleeve: 21 mm inner diameter, 50 mm long. The bottom is closed except for a 9 mm hole for the nozzle.
Overall size: 26 × 31 × 52 mm.
Check your board before printing. Euro pegboards from different brands use different keyhole sizes.
Mounting
Push the mushroom head through the round part of the keyhole.
Slide the holder down so the neck sits in the slot.
The neck is oblong, so the holder can't rotate once it's in the slot.
Printing
Orientation: standing upright, as in the file. The nozzle end goes on the bed.
Supports: none. The honeycomb tops are short bridges of about 4 mm, and the underside of the mushroom head is chamfered at 45°.
Brim: 5 mm, outer only. Recommended because the part is tall and narrow.
Tested with: PLA+, 0.2 mm layers, 2–3 walls, 15 % infill, 220 °C nozzle / 60 °C bed, Anycubic Kobra 4.
The 3MF contains the plate and settings I used.
Files
Desoldering_Pump_Holder_Euro_Keyhole_Honeycomb.stl: the model, oriented for printingDesoldering_Pump_Holder_Euro_Keyhole_Honeycomb.3mf: project for Anycubic Slicer Next / Bambu-style slicers, with print settings
Credits
Original design: NeOn, "Skadis desoldering pump holder", CC0
Remix and modifications made with the help of Claude (Anthropic AI):
The Skådis hooks were cut off in a Python script (trimesh + manifold3d).
A Euro keyhole mount was modelled in their place.
The honeycomb was opened up.
The mesh was checked so it prints without supports.
License
CC0. The original is CC0 too, so you can use it however you like.