Haunted House Lamp - Halloween House Light - AMS Optional
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lit Halloween house lamp
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 707
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A new addition to the house lamps I've designed over the years! But this one's for Halloween!
This lamp incorporates the use of this light puck and will also work with Bambu's light kit, too. However, I also provided a step file of the lamp holder so if needed, you can model up a solution for your specific light source.
All files should be oriented in the way they are meant to be printed.
Printing Instructions:
The 3mf provided was created using Bambu Studio and should already have all the following settings configured.
Layer height: 0.2mm
Supports: None
When printing the spikes, if you use wet filament, the stringing will add to the hauntiness of the house ;)
Assembly:
Refer to the attached assembly guide for instructions.
Thank you for your time and consideration on this matter.
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!
Filament used in this creation:
Polymaker Cotton White Matte PLA
Polymaker Charcoal Black Matte PLA
Polymaker Muted Green Matte PLA
Polymaker Galaxy Dark Brown PLA
Polymaker Earth Brown Matte PLA
Polymaker Translucent Jade PLA
Polymaker Fossil Gray Matte PLA
Need some filament? Get 15% off with code BEARDEDPRINTER
Use my affiliate link to buy some!