1 / 8
Haunted House Lamp - Halloween House Light - AMS Optional — image 1
1 / 8

Haunted House Lamp - Halloween House Light - AMS Optional

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A lit Halloween house lamp

Rating
5 / 5
Likes
31
Downloads
81
Makes
1
Views
707
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

A new addition to the house lamps I've designed over the years! But this one's for Halloween!

This lamp incorporates the use of this light puck and will also work with Bambu's light kit, too. However, I also provided a step file of the lamp holder so if needed, you can model up a solution for your specific light source.

All files should be oriented in the way they are meant to be printed.

Printing Instructions:

The 3mf provided was created using Bambu Studio and should already have all the following settings configured.

  • Layer height: 0.2mm

  • Supports: None

  • When printing the spikes, if you use wet filament, the stringing will add to the hauntiness of the house ;) 

Assembly:

Refer to the attached assembly guide for instructions.


Thank you for your time and consideration on this matter.

For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!

Filament used in this creation:

  • Polymaker Cotton White Matte PLA

  • Polymaker Charcoal Black Matte PLA

  • Polymaker Muted Green Matte PLA

  • Polymaker Galaxy Dark Brown PLA

  • Polymaker Earth Brown Matte PLA

  • Polymaker Translucent Jade PLA

  • Polymaker Fossil Gray Matte PLA

Need some filament? Get 15% off with code BEARDEDPRINTER

Use my affiliate link to buy some!

https://shop.polymaker.com/BEARDEDPRINTER

Tags