1 / 5
Trident Bed Wiring Organiser with cover (Wagos and Molex) — zdjęcie 1
1 / 5

Trident Bed Wiring Organiser with cover (Wagos and Molex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tidy wiring for your Trident beat heater, thermal fuse, and thermistor

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to be able to wire my bed heater, thermal fuse and thermistor for easy bed removal.

I'm in the UK, so on 240V a second level of insulation or seperation is no bad idea, so I combined my design with a remix of a cover, modifieid to fit nicely around it

You need

  • 4 x M4x10/12 bolts

  • M4 roll-in or t-nuts

  • Wago 221-412 x 4

    • live-in to bed-thermal-fuse

    • bed-thermal-fuse to bed-live

    • neutral-in to bed-neutral

    • earth-in to bed-earth-point

  • Molex 436400201 Micro-fit 3.0 Plug Housing 2 Pin (for Thermistor)

  • (optional) M2x6/8 screw to hold the molex in place - screw in from rear

Materials

  • ASA or ABS or better

  • Supports needed in obvious places

Tagi