1 / 2
5.6x52R Ammo Box – Hunting Edition Roe Buck Motif — zdjęcie 1
1 / 2

5.6x52R Ammo Box – Hunting Edition Roe Buck Motif

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable ammo box designed for 5.6x52R cartridges, made for hunting and practical ammunition storage.

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A compact 3D printable ammunition box designed for 5.6x52R cartridges. The box is made for hunters who want a practical and organized way to store and transport their ammunition. Designed with a sturdy lid and suitable for use at home, at the shooting range or during hunting trips.1 × ammo box body

  • 1 × lid

  • 1 × sealing/gasket frame

  • 2 × printed hinge/locking parts

  • 6 × M3 screws, cut to 35 mm

  • 6 × M3 nuts

Assembly

  1. Clean all printed parts and remove any support material or loose filament.

  2. Drill all screw holes carefully with a 3 mm drill bit.

  3. Cut the M3 screws to approximately 35 mm using a screw/wire cutting tool.

  4. Position the lid, hinges and locking parts as shown.

  5. Push the M3 screws through the prepared holes.

  6. Fit an M3 nut to each screw.

  7. Tighten carefully until everything moves smoothly and sits securely.

  8. Do not overtighten the screws, as this can damage the printed parts.

Tip: Black M3 screws look especially good with the hunting-style ammo box.

Tagi