Threaded Wye Bow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use worker barrels with a wye bow
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use worker threaded barrels with a 16mm heat set insert (from out of darts) on a wye bow.
Standard wye bow hardware, tc / caliburn size plunger tube, (solid! not hollow!) fiberglass driveway marker rods, string or paracord, threaded worker barrel.
Changes - thickened pull grip, 2x screw point for tighter plunger tube cap, refactored body, variations on bow arm angles (mostly cosmetic, slightly more draw weight)
Notes
v4 and v5 are a little thin on the top of the 16mm worker barrel insert, can crack with inelegant installation or brittle filaments. Recommend v7 for a more robust print.
Sanding the interior of the wye with a bit of sandpaper on a stick can help feeding issues
The hopper tube opening can be a little tight depending on the type of tube you're using. If using PVC I recommend lightly heating the hopper socket and working the PVC in and letting it cool to get a precise friction fit
Optional
- a -016 o-ring between the heat set insert and the internal wye may improve air seal between the threaded barrel and the printed wye - https://www.mcmaster.com/9452K6/
1 or more rival rounds glued to the plunger head for shock absorption
an extra long string / paracord with room for extra alpine knots so you can tune your bow for quickly configurable FPS tensions - https://www.netknots.com/rope_knots/butterfly-knot
clear 1/2 pvc tubing for the dart hopper (you can print this but it looks nicer) - https://www.mcmaster.com/49035K23/
1/2 pvc butterfly valve for dart gate (you can use a bungee cap but this looks nicer)
horizontal orientation printed hopper tubes - configure as one or two sided (inconvenient to sand interior)