1 / 4
Threaded Wye Bow — image 1
1 / 4

Threaded Wye Bow

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use worker barrels with a wye bow

Rating
0 / 5
Likes
11
Downloads
6
Makes
0
Views
215
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Use worker threaded barrels with a 16mm heat set insert (from out of darts) on a wye bow. 

Standard wye bow hardware, tc / caliburn size plunger tube, (solid! not hollow!) fiberglass driveway marker rods, string or paracord, threaded worker barrel. 

Changes - thickened pull grip, 2x screw point for tighter plunger tube cap, refactored body, variations on bow arm angles (mostly cosmetic, slightly more draw weight)

Notes

  • v4 and v5 are a little thin on the top of the 16mm worker barrel insert, can crack with inelegant installation or brittle filaments. Recommend v7 for a more robust print.

  • Sanding the interior of the wye with a bit of sandpaper on a stick can help feeding issues

  • The hopper tube opening can be a little tight depending on the type of tube you're using. If using PVC I recommend lightly heating the hopper socket and working the PVC in and letting it cool to get a precise friction fit



Optional

  • - a -016 o-ring between the heat set insert and the internal wye may improve air seal between the threaded barrel and the printed wye - https://www.mcmaster.com/9452K6/ 

  • 1 or more rival rounds glued to the plunger head for shock absorption 

  • an extra long string / paracord with room for extra alpine knots so you can tune your bow for quickly configurable FPS tensions - https://www.netknots.com/rope_knots/butterfly-knot

  • clear 1/2 pvc tubing for the dart hopper (you can print this but it looks nicer) - https://www.mcmaster.com/49035K23/

  • 1/2 pvc butterfly valve for dart gate (you can use a bungee cap but this looks nicer)

  • horizontal orientation printed hopper tubes - configure as one or two sided (inconvenient to sand interior)

Tags