1 / 3
foot anchor for CARBON 13 Printable Jointed Figure - Type F — zdjęcie 1
1 / 3

foot anchor for CARBON 13 Printable Jointed Figure - Type F

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

foot anchor for CARBON 13 Printable Jointed Figure - Type F

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Public Domain

I had trouble with the action figure toppling over when I tried awkward poses.... especially with high heels...

I have anchored the toe to a removable base so when the figure is attached to the toe you may swivel it around.

this is scaled to fit the 250% scaled version.

if you measure the toe on your model and scale the anchor to the same size,the joint will fit.

you remove the toe from your model and attach the joint to the anchor....

by changing the filament at the right layer, you can make the anchor toe the same as your model

also you can mirror it to fit the other foot insead....