1 / 3
foot anchor for CARBON 13 Printable Jointed Figure - Type F — image 1
1 / 3

foot anchor for CARBON 13 Printable Jointed Figure - Type F

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

foot anchor for CARBON 13 Printable Jointed Figure - Type F

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Public Domain

I had trouble with the action figure toppling over when I tried awkward poses.... especially with high heels...

I have anchored the toe to a removable base so when the figure is attached to the toe you may swivel it around.

this is scaled to fit the 250% scaled version.

if you measure the toe on your model and scale the anchor to the same size,the joint will fit.

you remove the toe from your model and attach the joint to the anchor....

by changing the filament at the right layer, you can make the anchor toe the same as your model

also you can mirror it to fit the other foot insead....