1 / 1
Archery Target Pin - Centenary Archers Club — zdjęcie 1

Archery Target Pin - Centenary Archers Club

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pins to hold archery target faces to foam/etc target butts.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1 + General Attribution v1

These are the Target Pins that the Centenary Archers Club Inc. (Australia) uses to pin target faces to target butts.

These are best made from ABS so they don't warp or soften in the hot Australian (Queensland) sun.

Alternatively, PETG will suffice. PLA gets very soft to quickly. Only use PLA if you have no alternative or you're in a cold climate.

Our archery club has been using them successfully for many months now.

This target pin's design was originally inspired by the general layout of the Beiter target pins, but has significantly evolved from that.

3mf file are from my FlashForge AD5M.

Tagi