Biathlon Inspired Shooting Target (Nerf, Water and BB gun compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Real biathlon standing target size & colours. Knock-down plate, print-in-place hinge. For water, Nerf and BB guns.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
🎯 Biathlon at home
The dimensions follow the biathlon target for the standing position, and the colours match the competition target: white frame, black hit zone. When you hit the plate, it flips backward and the black circle disappears, just like on the real range.
✨ Features
Universal: works with water guns, Nerf and other foam dart blasters, and low-power BB guns
Print-in-place hinge in the main frame, with no pins, screws or assembly
Arched cage catches the plate after a hit, and the hexagon floor keeps the weight down
Reset by tilting the plate back up
Size: 200 × 210 × 210 mm
🖨 Printing
Supports required (for the arches and hinge area)
Two colours: white for the frame, black for the target plate
For BB guns, a tougher material such as PETG or ASA will handle impacts better than PLA
🔧 Assembly
Print the frame and the target plate.
Free the print-in-place hinge carefully and check it moves smoothly.
Glue the plate to the hinge with super glue (CA) or a hot glue gun. Hot glue is easier to repair later.
⚠ Known limitations (v1) & what's next
This version puts appearance first. The thin arcs can crack under repeated hard hits or drops. Version 2 will add side reinforcement ribs to stiffen the arcs. It will look a bit less minimal but will be noticeably more durable. Feedback and makes are very welcome!
🛡 Safety
Always wear eye protection when shooting BB guns, and never aim at people or animals. Plastic prints can shatter if hit hard.