Biathlon Inspired Shooting Target (Nerf, Water and BB gun compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Real biathlon standing target size & colours. Knock-down plate, print-in-place hinge. For water, Nerf and BB guns.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 11
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial
Description
🎯 Biathlon at home
The dimensions follow the biathlon target for the standing position, and the colours match the competition target: white frame, black hit zone. When you hit the plate, it flips backward and the black circle disappears, just like on the real range.
✨ Features
Universal: works with water guns, Nerf and other foam dart blasters, and low-power BB guns
Print-in-place hinge in the main frame, with no pins, screws or assembly
Arched cage catches the plate after a hit, and the hexagon floor keeps the weight down
Reset by tilting the plate back up
Size: 200 × 210 × 210 mm
🖨 Printing
Supports required (for the arches and hinge area)
Two colours: white for the frame, black for the target plate
For BB guns, a tougher material such as PETG or ASA will handle impacts better than PLA
🔧 Assembly
Print the frame and the target plate.
Free the print-in-place hinge carefully and check it moves smoothly.
Glue the plate to the hinge with super glue (CA) or a hot glue gun. Hot glue is easier to repair later.
⚠ Known limitations (v1) & what's next
This version puts appearance first. The thin arcs can crack under repeated hard hits or drops. Version 2 will add side reinforcement ribs to stiffen the arcs. It will look a bit less minimal but will be noticeably more durable. Feedback and makes are very welcome!
🛡 Safety
Always wear eye protection when shooting BB guns, and never aim at people or animals. Plastic prints can shatter if hit hard.