iPhone 18 / 17 Pro Max MagSafe Bed Holder / Charger (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach this charging base to your bed to easily charge your phone with MagSafe. Assembles easily in three pieces.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Need a convenient way to charge your phone at night? or just a place to store it? Fret not! This nifty charging mount that attaches easily to most bed frames and creates a space where you can charge your phone at night. Behold:

This model contains printing files for the following MagSafe pucks:
Along with a number of different bed frame sizes.
The hooks folder contains one model per bed frame thickness (18–32mm), each in a plain and + case variant.
The pucks folder has one per puck size (55.7x4.42 for A2580/A3250, 56.1x5.35 for A2140, 59x7.2 for the knockoff), each in a plain and + case variant. Pick one hook for your bed and one mount for your puck; keep both the same variant
If none of these work out for you the model can quite easily be updated to fit your specific needs - please refer to the last section on this page for more info.
Printing instructions
I suggest printing with variable layer height in the following orientation:

Consider adding mouse ears to the corners if you experience corner lifting.
Assembly
Once you have printed the three pieces, locate some super glue - you are now ready to assemble the three pieces.

Pour a bit of glue in the corner of each of the two end pieces like so:

Be mindful when you pour to ensure that the glue disperses somewhat uniformly around the indentation. When gluing together, ensure the thumb hole is pointed outwards as seen below:

Align the end-pieces around the holder and keep it tight for a couple of minutes to let the glue solidify. Once your three pieces have become one, we can now attach the MagSafe charger.
To the backside of the charger, add double-sided tape:

Then guide the cable through the hole like so:

Pull the wire through then remove the backing for the double-sided tape and attach the MagSafe charger securely in its spot:

You are now ready to attach it to your bed frame.
Cable Management
The cable for your MagSafe charger can be guided along one of the end-pieces such that the cable be nestled in between the mattress and the bed frame and then towards what ever power outlet you may have.


Mount sliding around?
If you find that the charger is not sitting tightly on the bed frame you can add a little double sided tape to one of the end pieces like so:

Tailoring the mount to your liking
None of the uploaded models work for you? The FreeCad design file contains multiple variables that can be changed to match your needs.
When you open the model in FreeCad you will find a "VarSet" in the "Phone" body:

Once selected, you can change from a multitude of different options, however; I suggest you stick to the ones in the "Change" section:

These allow you specify:
How thick the frame of your bed is
How much extra spacing your case adds
The dimensions of your MagSafe charging puck.