Trophyline EDP Molle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip to hold a Trophyline saddle hunting platform on your saddle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Trophyline Saddle Clip
A molle clip specifically designed to hold your Trophyline Platform to your saddle as you climb. This was specifically designed for the EDP but appears that it would work on all Trophyline platforms.
Printing Instructions
Print the main body with the arms flat on the build plate. No supports needed and printing in the orientation provides the strength needed in the correct direction.
Print the molle clamp section on its side. You will need supports to print this part.
For both pieces use at least 4 walls so the import parts are strong enough. I printing with PLA but ASA or PETG would probably be better choices.
Assembly
The 2 pieces will be a tight fit (as designed). Use a bench vise to squeeze the 2 pieces together until they are seated into each other. Make the chamfer is facing down towards the molle clip when you press them together. The chamfer is to provide clearance between the 2 parts.