Ball and Cups/Chop Cup Magic Trick Routines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball and Cups and Chop Cup magic trick props. works great for several different magic tricks. Can use sponge balls too.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
there are 2 different models of cup one has screw on bottom that can have magnets glued inside for the chop cup trick. the other is just a plain cup for the ball and cups routine. you can print 3 of them.
the ball prints in 2 parts. one has nubs and the other has insert holes. they snap together and then twist. a magnet can be placed inside the recessed areas. no glue required to hold the ball together. after testing it can handle being dropped just fine without separating. you may need to use a flat tool to pry it back open if you need too.
pretty strong magnets are required to make it perfect i believe. i have done a lot of test printing in PLA the ball is fully functional and works great. the cup threads gave me a lot of trouble but they are working great as well. i haven't printed a plain cup but i printed the chop cup and several thread tests.
there are several tricks that can be done with cups and balls you can do a lot of them with these all though you may need to use foam balls for some.
this print will pair perfectly with my wand model:
I would love to see some makes, comments and constructive feedback. thank you for checking it out.